FixAll-er.

Tilers in the West Midlands

Tiling jobs across Birmingham and the surrounding area typically involve bathrooms and kitchens, from full wet-room installations in newer developments around the city centre to retiling older bathrooms in Victorian and Edwardian terraces where walls are rarely perfectly flat or square. Older properties can also hide uneven floor screeds or timber floors that need extra preparation before tiles will sit correctly, which is worth flagging when you post a job.

Work posted on FixAll-er ranges from a small repair — a handful of cracked or loose tiles — to a full bathroom retile, kitchen splashback or floor tiling project. Describe the area, the substrate (existing tiles, plaster, plasterboard, floor screed or timber), and whether it is a wet area such as a shower, and you will receive quotes from tilers interested in the job.

Post a job — get free quotes

Typical tiling jobs

What to think about before you book

Substrate preparation

Tiles need a flat, stable, clean surface to bond to. Uneven plaster, an old lumpy screed, flexing timber floorboards or loose existing tiles all need addressing before tiling starts, whether that means levelling compound, new plasterboard, plywood overlay or removing what is there. Mention any known unevenness, bounce in the floor, or damp when posting the job.

Wet-area preparation and waterproofing

Showers, wet rooms and areas around baths need appropriate waterproofing (commonly referred to as tanking) applied to the substrate before tiling, particularly on walls and floors that will see direct or prolonged water contact. This is a distinct step from the tiling itself and matters for preventing leaks into the structure below or behind — ask what waterproofing method is included and where it will be applied.

Drying and curing time

Adhesive and grout both need time to cure before the area is used, and a wet room or shower floor typically needs longer before it can be used normally than a splashback. Curing times are affected by the products used, tile size and ventilation, so ask the tiler for a realistic timeframe rather than assuming the room is usable immediately after grouting.

Tile size, material and finish

Large-format tiles need a flatter substrate and more precise setting than smaller tiles, and natural stone often needs sealing before and after grouting. Say what tile you have chosen (or ask for a recommendation) since this affects preparation, adhesive choice and the time the job takes.

What to specify when posting

Include the room or area size, the substrate if known, whether it is a wet area needing waterproofing, whether tiles are supplied by you or need sourcing, and photos of the current surface. This helps a tiler give a more accurate quote without a separate site visit.

Popular tilers locations

Tiling: common questions

How long after tiling can I use the shower or bath?
It depends on the adhesive and grout used, tile size, and ventilation, so timeframes vary between jobs. A tiler can give you an expected curing period before the shower should be used normally — using it too soon risks water getting behind tiles that have not fully cured.
Do I need waterproofing (tanking) in every bathroom?
Areas with direct water exposure, such as inside a shower enclosure or around a bath, generally need a waterproofing layer before tiling, while a splashback away from direct water spray may not. A tiler can advise on what is appropriate for your specific layout and fittings.
Can new tiles go over existing tiles?
Sometimes, if the existing tiles are sound, flat and well-bonded, but a tiler needs to assess this — loose, cracked or uneven existing tiles usually need removing first. Tiling over existing tiles also raises floor or wall height slightly, which can affect door clearances or transitions to other flooring.
Why does the floor need levelling before tiling?
Tiles, especially larger-format ones, can crack or sit unevenly (lippage) if laid on an uneven surface. A self-levelling compound or additional preparation is often needed on older screeds or uneven floors, which is why an on-site assessment can change the quote from an initial estimate.
What should I include when posting a tiling job?
The room or area size, the current substrate and its condition, whether it is a wet area, whether you are supplying the tiles, and photos of the space. That is usually enough for a tiler to give an informed quote before visiting.

Related services

Tilers by town & city

Ready to get quotes?

Posting a tiling job is free and there is no obligation to accept any quote you receive.

Post a job